Learning The “Secrets” of Printing

Ways in Which Fine Art Printing Is Completed

The fine art printing as a form of art has been in existence long before even technology had been thought of and it was done using traditionally made equipment. The art pieces of fine arts have been done by art masters and others have been made by well-known artists that have put a mark in the art world. The pieces made by fine art printing are worthless and are they take quite some time to finish.

There are four well known methods in which fine art is made and they include; planography, screen printing, relief and intaglio. They have been in use for over than five decades and are known to produce the best pieces. The way each of the above method is explained below.

The method that has been in existence the longest is the relief and was used to make some of the first major pieces. It is started by the artist cutting out a piece of material they want to use by a sharp method. The wood pieces are sculptures using knives and shapes intended carved out. The cut pieces would then be sprayed with ink and pressed against the paper the art was to be printed on. The process would involve application of pressure for even application of the ink on the paper. The wood and paper is then separated after some time when the paper is dried not to tear up.
The Beginners Guide To Resources (What You Need To Know To Get Started)

The planography pieces are done by paint being applied to a rock then it is pulled off when it has dried up to form a surface like material. The piece of selected rock is applied with a lube most of the time, which is just oil. The paint is then applied with care not to pass through the layer of oil. Removing of the art work is done after the piece has dried up well fro completion.
Services Tips for The Average Joe

The screen-printing method involves the covering of the areas not to be printed out with the use of special glue. This is the most recent form of printing and is mostly associated with large-scale printing. It is the most spread method of printing and the work can be put on any surface and the most used are cloths and papers.

With intaglio, pieces of wood are curved with the areas to be printed coming out of the wood. The protruding art piece in the wood is place in ink to pick the paint and then pressed against the surface to be worked on. This art work can be printed on any surface as long as the area can take the ink.

The printing in all the methods have all sizes and can be done to produce multiple pieces at the same time. You therefore have to weigh the time-frame left before undertaking the task.